For accurate precision sizing of internal bores and eliminating front and rear taper and bell
mouth conditions our Honing capabilities are
PREMIUM PROBLEM SOLUTIONS
Both the MBB-1600 manual, and the
MBC-1803 automatic stroke Sunnen Honing Machine offer Consistant bore sizing and finish.
Sunnen Honing combines the speed of
internal grinding with the accuracy of lapping. Stock is removed first from any high spots in the bore while low
spots are bridged by the honing stone until all "peaks" are leveled off. Surface finishes are accurately controlled
by the size of the grains used in the stones.
The Sunnen Honing Process combines precision with economy. It's
widespread acceptance throughout the industry is proof that "Today's tolerances and finishes call for Honing"
Tolerances of Plus or Minus .0002" can be held on Most Honing applications
Maximum Length of bore is Mandrel dependant
No.1803 Sunnen Honing Machine
... I.D. Work Diameter Range ... 1/16" thru 3-3/4"
... I.D. Honing Spindle Speeds(rpm) 200, 250, 320, 400
500, 640, 800, 1000
1270, 1600, 2000, 2500
... Stroke Length 1/4" thru 6"
... Stroke Speed(-1/min) 80, 110, 160, 220, 310
http://www.Newtron.com/honing.html -- Revised: May 25,1999
Copyright © 1999 Newtron Inc.