NEWTRON INC

132 Charles Street . Auburndale Ma,02466 . Telephone(617) 969-1100 . Fax(617) 969-1102
Home About Us Engineering Services Cad/Cam - I.T.Department Inspection QC Department Employment

Honing

For accurate precision sizing of internal bores and eliminating front and rear taper and bell mouth conditions our Honing capabilities are
PREMIUM PROBLEM SOLUTIONS

Both the MBB-1600 manual, and the MBC-1803 automatic stroke Sunnen Honing Machine offer Consistant bore sizing and finish.

Sunnen Honing combines the speed of internal grinding with the accuracy of lapping. Stock is removed first from any high spots in the bore while low spots are bridged by the honing stone until all "peaks" are leveled off. Surface finishes are accurately controlled by the size of the grains used in the stones.

The Sunnen Honing Process combines precision with economy. It's widespread acceptance throughout the industry is proof that "Today's tolerances and finishes call for Honing"

Tolerances of Plus or Minus .0002" can be held on Most Honing applications
Maximum Length of bore is Mandrel dependant

No.1803 Sunnen Honing Machine
... I.D. Work Diameter Range
... 1/16" thru 3-3/4"

... I.D. Honing Spindle Speeds(rpm) 200, 250, 320, 400
500, 640, 800, 1000
1270, 1600, 2000, 2500

... Stroke Length 1/4" thru 6"
... Stroke Speed(-1/min) 80, 110, 160, 220, 310
 
 

Request For Quotation on Honing Services To
Honing Services @ newtron.com